This procedure satisfies the requirements of Part 1 (OSHA Accepted Fit Test Protocols)
Topics include:
1. Proper instruction on donning (putting on) and doffing (taking off) the respirator.
2. Proper instruction on adjustment of the respirator.
3. Assessment of comfort which includes a review of the following points with the test subject and allows the test subject adequate time to determine the comfort of the respirator.a. Position of the mask on the nose
- Room for eye protection
- Room to talk
- Position of mask on face and cheeks
4.Test Exercises
- Normal breathing
- Deep breathing
- Turning head side to side
- Moving head up and down
- Talking
- Grimacing
- Bending over
5. Qualitative Fit Test – Irritant Smoke
This qualitative fit test uses a person’s response to the irritating chemicals released in the “smoke” produced by a stannic chloride ventilation smoke tube to detect respirator leakage.
Duration: Approximately ½ hour.
This course is not a substitute for Respiratory Protection Training.
Prior Respiratory Protection Training is required.
Materials Required: Test subject must bring his/her respirator equipped with high efficiency particulate air (HEPA) or P100 series filter(s) |